Inicio > Mis eListas > dxcolombia > Mensajes

 Índice de Mensajes 
 Mensajes 3758 al 3787 
Re: LICENCIA Ricardo
Re: Una sola letr German D
Fwd: ARLD023 DX ne Alvaro G
Re: Una sola letra David J.
RE: Una sola letra Maximo E
Re: Una sola letr Jham Sal
Re: Una sola letra David J.
Acerca de muchas r OSCAR AL
GHKCW en el World HK1AA .
RV: BS7H Press Rel Alexis D
Detrás de la barre David J.
Excusas para David OSCAR AL
Programas para cop Gabriel
RE: Re: BS7H Press Alexis D
Loop para 17m Alexis D
Vertical 5/8 6M Alexis D
Día Libre en la I FABER
Antena Hustler 4-B Gilberto
FW: Recordando a u eduardo
Re: Antena Hustler Ricardo
Videos eduardo
Re: Videos HK3CW
Busco transistor Juan Pal
RE: Antena Hustler Gilberto
Videos eduardo
Busco transistor Juan Car
 << 30 ant. | 30 sig. >>
Página principal    Mensajes | Enviar Mensaje | Ficheros | Datos | Encuestas | Eventos | Mis Preferencias

Mostrando mensaje 3782     < Anterior | Siguiente >
Responder a este mensaje
Asunto:[dxcolombia] Vertical 5/8 6M
Fecha:Lunes, 11 de Junio, 2007  11:15:09 (-0400)
Autor:Alexis Deniz M. 4M5DXgroup <yv5ssb>

6 Meter 5/8 Wave Vertical Antenna

By Mike, G3JVL

Editors note:
This antenna project and article was originally posted on the
UKSMG Web Site, (The UK 6 Meter Group), in Metric measurements
and is presented here for your enjoyment in U.S measurements.
Full credit goes to the author of the article, MIKE, G3JVL.

Only minor editing changes were made for clarity of measurements
( Metric conversion to feet and inches) and wording......N4UJW

The G3JVL 6 Meter ground plane vertical is a compact antenna that is ideal for portable operations. If needed, it can be disassembled into a very small bundle no longer than the longest element.

Although a little engineering work is required, it is well within the abilities of the home workshop and all you newly licensed amateurs or 6 Meter buffs!

The vertical itself is constructed out of four overlapping sections of aluminum tube whose sizes are given in the diagram below. The four tubes are meant to telescope, so wall thickness should be chosen to achieve this. In practice, 16swg  might be OK but 18swg  will easily fit. The lengths can be held in place by three stainless steel self-tapping screws or hose clamps.

The vertical is bottom-loaded with a coil wound on an insulated form (nylon or similar material - it is not too critical at 50MHz). - the form is about 5 inches long with the top 3/4 inch turned so it can be inserted into the bottom section of the vertical. The loading coil consists of ten turns of 16swg diameter coated or insulated copper wire with one end connected to the bottom section of the vertical with a machine screw and the other end connected to the ground plate. An adjustable tap at 5-turns is connected to the input PL-259 socket. Tap can be soldered or permanently attached in place after VSRW adjustment is final.

Base Details Below:

The construction of the 6m vertical antenna
The four ground plane elements are Constructed from 49.2 inch long,  (3/8") diameter aluminum tube. These are mounted to the base plate by the use of eight stainless steel machine screws.
This arrangement allows easy disassembly if needed.

The vertical itself is supported by a piece of 14 inch by 2 inch aluminum plate about 1/8 to 3/16 inch thick bent into a 90 degree angle on each end forming a... |______|... shape as viewed from the side and layed down.
The bottom section of the vertical is insulated by a turned piece of nylon or similar tubing. If you do not have access to a lathe, any other insulating arrangement should suffice so long as it is robust and can withstand wind loading on the mount.

The overall length of the vertical is about 13 feet 6 inches including the loading coil.
The top section should be adjusted to set the center frequency. If the VSWR at resonance is not close to 1:1 then alter the position of the tap on the loading coil (remember, changing this will alter the resonance of the antenna!).

Once completed give the whole assembly several coats of varnish to keep out the weather.

Editors note:
This project and article was originally posted on the
UKSMG Web Site (The UK 6 Meter Group)  in Metric measurements
Full credit goes to the author of the article, MIKE, G3JVL.

Powered by Ham Radio! hit countersetstats

No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.472 / Virus Database: 269.8.13/843 - Release Date: 10/06/2007 13:39

[Adjunto no mostrado: image011.png (image/png) ]
[Adjunto no mostrado: image012.png (image/png) ]